Usb files xbox

After you select one of the options, your Xbox console begins the process of erasing the selected content and resetting itself to the default settings. Reset using a USB flash drive. Step 1: On your computer. If you can't restore the factory default settings because you have no picture on your screen or you can't access the Settings menu, you can perform this action by using a file loaded onto a USB flash drive. To use the USB flash drive to restore your console to factory defaults, you'll need:.

Formatting a USB flash drive for this procedure erases all files on it. For more information, see:. Select the following link to download the reset file to your computer. This compressed file contains the files needed to reset your Xbox console to factory defaults:. Note The files should be copied to the root directory of the flash drive, and there shouldn't be any other files on the flash drive.

Step 2: On your Xbox console. Unplug the network cable if you're using a wired network connection. Power off your console, and then unplug the mains lead to ensure that the console is completely powered off.

Wait 30 seconds, and then plug the mains lead back in. Plug the flash drive into a USB port on your console. Note If you don't hear two power-up tones after 15 seconds, it means this failed. Likewise, if you hear any "power-down" chirps, that also means this failed.

Sorry this didn't help. Thanks for your feedback. Hi, I have an 8GB Usb drive which has run out of space, I'd like to copy the content downloaded games, etc. How can I do this? This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question 0. Report abuse. Thus, we will divide this part into 2 sections:.

Step 1: Check whether you can enter the Xbox Startup Troubleshooter. However, if the Xbox Startup Troubleshooter is unavailable, you can continue step 2. If you are using one of the above version, you can directly go to step 5 in this section.

However, if you are not using one of them, you need to perform two updates. You need to move to step 3 to go on. You need to use the same method mentioned in step 4 to perform the second update using the OSU1 file.